- 1 Where are Bulldog Jacks made?
- 2 What is the best trailer jack?
- 3 What size trailer jack do I need?
- 4 How long do trailer jacks last?
- 5 Are trailer jacks universal?
- 6 Can you grease a trailer jack?
- 7 How do you free up a trailer jack?
- 8 What size trailer jack do I need for 7000 lb trailer?
- 9 Does Home Depot sell trailer jacks?
- 10 How do I choose an electrical trailer jack?
Where are Bulldog Jacks made?
The Bulldog Jack part # BD182800 that you referenced was made in Mexico so it would work well for what you need.
What is the best trailer jack?
The Best Boat Trailer Jacks
- Reese Towpower 74410 Trailer Jack.
- MaxxHaul 70148 Trailer Jack.
- Fulton XP10 0101 Swivel Trailer Tongue Jack.
- Curt 28112 Boat Trailer Jack.
- Pro Series EJ10000101 Trailer Tongue Jack.
- MaxxHaul 70149 Swing Back Trailer Jack.
- Fulton XPD15L0101 Swivel Trailer Tongue Jack.
- Curt 28115 Boat Trailer Jack.
What size trailer jack do I need?
The required weight capacity of tongue jack is determined by calculating the tongue weight of your trailer. The rule of thumb for a boat trailer is 7-10% of the weight of your fully loaded trailer. If you have a 6000lb loaded trailer, using 10% as an example, you would require a tongue jack with a capacity of 600lbs.
How long do trailer jacks last?
The general consensus seems to be that they’re cheaply put together, last about one season and fail when you least expect it. Rinsing the jack with fresh water and lubing its gears regularly with marine-grade grease seems to help, but there’s a lot of angst on the Internet about the humble trailer jack.
Are trailer jacks universal?
Yes, about 99 percent of A-frame jacks use the same mounting pattern. The holes are generally 3 inches apart on center though it can vary ever so slightly which is why some jacks have slotted holes.
Can you grease a trailer jack?
Like any moving metal piece it needs lubrication to do its job correctly. This is especially true for the jack which will get exposed to road grime and occasionally get submerged in water, both fresh and salt. Grease not only helps the parts move smoothly, but provide some protection from these elements and rush.
How do you free up a trailer jack?
Step 1 How to Repair a Stuck Trailer Jack
- Remove the trailer jack from trailer.
- Use a 19mm box end wrench to remove the 19mm hex head bolt that secures the jack to the trailer.
- Slide the jack off the trailer to remove.
- Be sure to safely support the trailer before removing (With a vehicle or jack stands).
What size trailer jack do I need for 7000 lb trailer?
Typically trailer tongue weight is 10-15 percent of the weight of the trailer. This means that when loaded to maximum, your tongue weight would vary between 700 and 1050 lbs. I recommend the Bulldog A-Frame Jack, part # BD1550101344. A foot is available, part # PS1400700340.
Does Home Depot sell trailer jacks?
Trailer Jacks – Car Jacks – The Home Depot.
How do I choose an electrical trailer jack?
In general a properly loaded trailer’s TW will be about 15-percent of its gross weight. You’ll want to select a jack based on the trailer’s heaviest weight condition, in other words when it is fully loaded. This will let you select a powered tongue jack with enough capacity and enough safety margin.